Golden Eagle 2002

Overview

Designed to chamfer pallet deck boards at high speed rate with low cost per piece. Years of engineering and working with customers have allowed us to maintain a chamfer with a very smooth trouble free feed system.

Features

1/2" to 1 1/8" Board Thickness
3 1/2" to 6" Board Width (with proper setting)
30" Minimum to 60" Maximum Board Length
Variable Speed Feed Rate
10" Diameter Cutter (8) Wing Index Able Carbide Insert

Specs

Frame & System

Heavy Duty: 3/4" Plate, 4 X 6 and 4 X 10 tubing with internal bracing motor and arbor base is made of 7/8" plate
Guards: All steel and designed for safety and convenience
Arbor: 10HP TEFC 3600 RPM
Arbor Belt Drive: 2-belt heavy duty
Work Height: 33"

Board Specs

Thickness: 1/2" to 1 1/8"
Width: 3 1/2" to 6" with proper setting
Length: 30" minimum to 60" maximum

Frame & System

Feed: #80 chain feed with heavy duty dogs, powered by 2 HP motor and gear reducer with variable frequency drive for variable speed feed
Feed Rate: Variable speed can easily be turned up to high volume and run with two operators or slowed down to run as one man operation. Controlled by potentiometer knob on control panel.

Cutter

10" diameter (8) wing index able carbide insert. This is an outstanding improvement over all others. Cutters stay sharp longer and run noticeably quieter.

Stacker

Comes with out feed accumulator
This is a gravity stacker that slides new board under existing stack
It is a simple and effective way of accumulating boards

Dust Pickup

4" by 10" rectangular opening over cutter heads

Electrical

Electrical - controls and starter panel are pre-wired for fast installation
Complete control panel with main disconnect, overload protection for each motor, full voltage starter for 10 HP arbor motor, variable frequency drive for 2 HP feed motor, control circuit transformer and buttons, all enclosed in NEMA enclosure
Electrical package is wired to fit your application